First you have to do the following:

If the uniform noise is normal, depending on the hit material, the noise sound of the noise is different. If it is an abnum, it is necessary to check whether the direction of the belt rotation is reversed. The motor shredder of the plastic mill is high, and the sound is large. Check if the internal rotor is eccentric and the pulley is loose.

There are two reasons: one is the double bearing wear, need to be replaced. Second, the hammer is wear, and the effort is inconsistent, causing the machine to jitter, the sound is large.

Second, the machine has running, and the vibration is intensely needed to consider the bottom iron pipe fixation. It is also said that it is not desirable to use the weight of the weight, which is wrapped with a cotton. This is not advisable, and the machine needs to heat up. It is recommended to place a special soundproof room.

Noise reduction is nothing more than the sound, and the sound absorption is two methods. They are all modifications to the working environment of the plastic crusher.

For example, ceiling, soundproof wall, soundproof.

However, these are not the fundamental ways to solve the problem.

Therefore, it is necessary to select the stranger when choosing a plastic powder pulverizer. The blade chamber real double-layer soundproofed plastic crusher.